AC Duct Cutting Services in Dubai

When HVAC systems need to pass through concrete walls, slabs, or ceilings, precision is critical. Core Cutting DXB delivers clean, accurate AC duct openings using diamond core cutting and wall sawing techniques for residential, commercial, and industrial projects across Dubai.

From villas to high-rise buildings, we ensure safe, dust-controlled cutting that complies with Dubai Municipality and site regulations—always on time and with zero structural damage.

Request a Free Quote

What Is AC Duct Cutting?

Core Cutting DXB is one of Dubai’s most reliable core cutting and concrete cutting companies, serving contractors, developers, MEP firms, and homeowners across the UAE for over 15 years. We specialise in core drilling, concrete saw cutting, wall sawing, wire cutting, floor sawing, and controlled demolition — using diamond-tipped equipment from Husqvarna and Hilti for clean, vibration-free results. Whether you need a 50 mm core hole for plumbing or large-scale slab cutting on an active construction site, our certified operators deliver precision work with zero damage to surrounding structures. Get a transparent core cutting quote in Dubai within 24 hours.

Our AC Duct Cutting Services in Dubai

We provide a complete range of duct cutting and core cutting solutions for every type of HVAC installation:

AC Duct Core Cutting

Circular openings cut with diamond core bits for split AC copper pipes, drain lines, refrigerant lines, and small ducts. Sizes from 25mm to 350mm diameter, cut through concrete walls, blockwork, and slabs without vibration or structural impact.

AC Duct Wall Cutting

Rectangular and square openings cut through walls using wall saws and diamond blades — ideal for larger HVAC supply and return ducts, fresh-air intakes, and exhaust ducts. We handle both load-bearing concrete walls and partition walls.

Ceiling & Slab Duct Cutting

Slab cutting for AC ducts running between floors, including ceiling duct opening cutting for chilled-water lines, drainage, and ventilation shafts. Performed with floor saws and core drills suited to the slab thickness and reinforcement layout.

AC Sleeve Opening Cutting

Precise sleeve openings for split AC units, VRF systems, and ducted concealed AC units — typically 60mm to 110mm diameter, finished smooth so PVC sleeves slide in cleanly with no chipping.

HVAC Opening Cutting for MEP Contractors

Coordinated MEP cutting services in Dubai supporting mechanical contractors during fit-out and refurbishment — multiple openings per visit, shop-drawing compliance, and rapid mobilisation to keep your schedule on track.

Air Conditioning Duct Cutting for Renovations

Modifying existing concrete structures to accommodate new AC layouts, central HVAC upgrades, or chiller relocations — including re-cutting and resizing existing duct openings without damaging surrounding finishes.

Why Professional AC Duct Cutting Matters

Cutting concrete for HVAC ducts looks straightforward — but mistakes are expensive. Here’s what professional duct cutting in Dubai protects you from:

  • Structural damage — wrong cut location can sever rebar, weaken beams, or crack load-bearing walls.
  • Project delays — botched openings need patching and re-cutting, costing days on tight fit-out schedules.
  • Dust and debris claims — uncontrolled dry-cutting in occupied buildings triggers complaints, fines, and shutdowns.
  • Duct misfit — undersized or oversized openings force ductwork rework, costing material and labour.
  • Authority issues — sites under Dubai Municipality, Trakhees, or DDA inspection require documented, compliant cutting methods.

Our team eliminates all of these risks with concrete scanning, diamond cutting technology, and proper water/slurry management.

Equipment & Techniques We Use

We invest in industry-leading equipment to deliver fast, clean, and safe AC duct cutting across Dubai:

  • Diamond core drills (25mm – 600mm) for circular openings
  • Hydraulic and electric wall saws for large rectangular cuts
  • Diamond floor saws for slab cutting and ceiling penetrations
  • Wire saws for thick reinforced concrete sections
  • GPR concrete scanners to locate rebar, post-tension cables, and embedded services before cutting
  • Dust extraction and water suppression systems for occupied buildings, malls, hospitals, and offices

Every machine is operated by a trained, certified technician — not a general labourer.

Our Process – How AC Duct Cutting Works

We follow a strict 5-step process for every duct opening cutting service:

Free Site Survey

 Our team visits your site, reviews MEP drawings, and identifies all duct opening locations.

Concrete Scanning

 Before any cut, we scan the wall or slab to locate rebar, conduits, and post-tension cables — preventing accidents and structural damage.

Marking & Approvals

 Openings are marked, cross-checked against shop drawings, and approved by your MEP consultant or main contractor.

Precision Cutting

 We execute the cut using the right equipment (core drill, wall saw, or floor saw) with full water and dust control.

Cleanup & Handover

 Slurry is collected, the area cleaned, and openings handed over ready for duct installation. Photos and reports provided on request.

AC Duct Cutting Across All Dubai Areas

We provide AC duct cutting services across every major area in Dubai — same-day mobilisation available for urgent jobs:

  • AC Duct Cutting in Business Bay – High-rise commercial towers, hotels, fit-out projects
  • AC Duct Cutting in Dubai Marina – Residential towers, podium-level retail, marina-front developments
  • AC Duct Cutting in JVC (Jumeirah Village Circle) – Villa communities, low-rise apartments, townhouse projects
  • AC Duct Cutting in Al Quoz – Warehouses, industrial units, showrooms, workshops
  • AC Duct Cutting in Deira – Older buildings, hotel refurbishments, retail outlets
  • AC Duct Cutting in Jebel Ali – Industrial facilities, JAFZA warehouses, factory HVAC installations
  • AC Duct Cutting in Downtown Dubai – Premium residential, retail, and commercial fit-outs
  • Other areas: Dubai Hills, JLT, Al Barsha, Mirdif, DIFC, Silicon Oasis, Arabian Ranches, Sports City, Motor City, Dubai South, International City, Discovery Gardens

Looking for an “AC duct cutting service near me” in Dubai? We’re a short call away from anywhere in the emirate.

Why Choose Us as Your AC Duct Cutting Contractor in Dubai

Licensed & Insured

Fully registered Dubai concrete cutting contractor compliant with Dubai Municipality and major developer site requirements.

Diamond Cutting Specialists

Diamond core cutting and concrete coring in Dubai is our core business — not a side service.

Flexible Scheduling

Night-shift cutting available for malls, hotels, hospitals, and operational offices.

 Dust & Slurry Control

Wet cutting with full water management and protective sheeting — safe for occupied buildings.

Fast Mobilisation

Most jobs scheduled quickly; urgent same-day call-outs available.

Transparent Pricing

Custom quotes per project with no hidden charges. Free site surveys across Dubai.

Who We Work With

Our AC duct cutting company in Dubai is the trusted partner for:

  • MEP contractors needing fast, coordinated cutting during installation
  • HVAC contractors installing central AC, VRF, and split systems
  • Fit-out and interior contractors renovating offices, retail, F&B, and clinics
  • Main contractors on new-build residential and commercial projects
  • Facility management companies handling refurbishments and upgrades
  • Hotel and hospitality groups requiring clean, low-disruption cutting in operational buildings
  • Homeowners and villa owners installing or upgrading AC systems

AC Duct Cutting Pricing in Dubai

Every AC duct cutting job is different — pricing depends on the opening size, concrete thickness, reinforcement, location, access difficulty, and whether the work requires night-shift hours in occupied buildings.
Rather than list generic rates, we prefer to give you an accurate, no-obligation quote based on your actual project. Share your shop drawings or request a free site visit, and our team will inspect, measure, and quote the same day.
Contact us for pricing — transparent rates, no hidden charges, and a free site survey across all areas of Dubai.

Frequently Asked Questions  

Absolutely. Our wet cutting and vibration-controlled methods produce minimal dust, noise, and structural impact — making us suitable for hospitals, hotels, malls, offices, and occupied residential buildings.

AC duct cutting is the controlled cutting of openings in concrete walls, slabs, or partitions to install HVAC ducts, AC sleeves, copper pipes, and ventilation systems. It uses diamond core drills, wall saws, and floor saws to create precise, structurally safe openings.

Pricing depends on the opening size, concrete thickness, rebar density, site location, and whether the job requires night-shift work. Every project is unique, so we provide custom quotes after a free site visit or after reviewing your shop drawings. Contact us today for transparent, competitive pricing tailored to your project.

A standard 100mm – 200mm core cut takes 15 – 45 minutes. Larger rectangular wall openings can take 1 – 4 hours. Most residential AC sleeve jobs are completed in under an hour per opening.

Yes. We use wet diamond cutting with full water and slurry management, plus protective sheeting. This is suitable for offices, hotels, hospitals, malls, and homes where dust control is critical.

Absolutely. Our diamond core drills, wall saws, and wire saws are designed for reinforced concrete. We scan first to locate rebar and post-tension cables, then cut safely without damaging the structure.

Yes. We are a fully licensed and insured concrete cutting and coring contractor in Dubai, compliant with Dubai Municipality and main developer site regulations.

Yes. For urgent jobs, we can typically mobilise quickly anywhere in Dubai — including evenings, weekends, and night shifts.

All of Dubai — Business Bay, Dubai Marina, JVC, Al Quoz, Deira, Jebel Ali, Downtown, Dubai Hills, JLT, DIFC, Silicon Oasis, Al Barsha, Mirdif, and every other community.

For most fit-out and renovation work, your main contractor or building management will need to approve cutting locations. We assist by providing method statements, risk assessments, and insurance certificates required by Dubai building authorities.

Contact Us

Need expert concrete cutting services? Contact our team today for fast, reliable, and professional support. We’re ready to handle your project with precision, whether it’s core drilling, saw cutting, or wire cutting. Reach out now for a quick quote and let us deliver safe and efficient solutions tailored to your requirements.

Address

Warsan First – Dubai International City – Dubai

Phone

+971 55 112 2381

Email

corecutdxb@gmail.com

Opening Time

Sun–Sat, 8:00 AM – 5:00 PM Emergency service 24/7